fbpx
LINEMAN’S TOOLS & EQUIPMENT

Truck Grounding Set – T6001971

Truck Grounding Set – T6001971

• Drains off capacitance or static charges from winch trucks and aerial devices
• This grounding method should not be considered adequate protection for personnel against conductor contact

Kit Weight – 35 lb.

Kit Contains:

Screw Ground Rod
Catalog No. G3370)
When installed, 6’ copper-clad rod develops less
resistance than straight ground rods. Helix (spiral
section), T-handle and wingnut are bronze for high
conductivity

Flat Face Ground Clamp
Catalog No. T6001798)
For secure attachment to the truck bed at an area
cleaned for electrical contact, clamp features bronze
T-handle, aluminum body and serrated jaws with range
for 1/8″ to 1-1/2″ angles or flats. Ratings: 400 amps
continuous current; 25,000 amps fault current for 15
cycles and 30 cycles

C-Type Ground Clamp
Catalog No. C6001754)
For connection to vertical shaft of ground rod, clamp
features smooth jaws and bronze eyescrew. Ratings: 350
amps continuous current; 28,000 amps fault current for
15 cycles and 20,000 amps fault current for 30 cycles

Grounding Cable and Ferrules
Catalog No. S6116 & C6002618)
For easy handling, extra-flexible #2 copper cable
features fine stranding and tough yellow T-prene rubber
compound jacket for all-temperature uses down to
-20°F. Cable length is 50 feet. Two shrouded aluminum
ferrules come factory-installed on the cable to secure the
threaded studs in the clamp terminals

Storage Reel
Catalog No. C4176086)
To help keep ground set clean and ready for use, reel
features tubular-steel frame which can be bolted to
deck. Reel is for storage only. Cable and clamps must be
removed completely from reel before use. Failure to do
so could result in a dangerous voltage drop and violent
mechanical reactions. A label on the unit gives this
warning.

WordPress PopUp Plugin
Translate »
LineStar