Sherman & Reilly Reel Stand
PRODUCT #CRS-68/44
The Sherman + Reilly Reel Stand is for stationary holding/supporting of reels for dispensing conductor from a fixed position. Maximum reel size for the CRS-68/44 is 68 in. OD by 44 in. wide with a reel capacity of 8,000 lbs.
Constructed of structural grade steel tubing, all components are welded for maximum rigidity. When properly configured, the CRS-68/44 features integrated manual controls for their hydraulic retrievers. Quick-disconnect fittings allows for rapid setup. This stand is a heavy-duty operator controlled, disc-caliper brake, which assures safe, well-controlled pulls.
Each stand is equipped with four (4) anchoring rings at each corner which make it easy for operators to further secure. It is also equipped with four (4) grounding bars at each corner that facilitate convenient and safe electrical grounding.
| • Maximum Reel Size: | 72 in. OD x 44 in. wide |
| • Maximum Reel Weight: | 8,000 lb., fully loaded |
| • Payout Brake: | Hydraulic, 16 in. dia. disc, Al-bronze, manually controlled |
| • Frame Configuration: | Reinforced truss on rectangular base |
| • Frame Construction: | High-strength steel tubing, continuous-weld |
| • Length: | 5 ft. |
| • Width: | 6 ft., 5 1/2 in. |
| • Height: | 3 ft., 5 in., without reel |
| • Grounding: | 3/4 in. dia. copper ground loops, 4 ea. |
| • Tie-Downs: | D-rings, 1 in. dia. steel, 4 ea. |
| • Paint: | S+R white |
