LINEMAN’S TOOLS & EQUIPMENT

Clamp Star – Single Rail

Clamp Star – Single Rail

With ClampStar®, failing splices are repaired with NO power interruption and splice replacement is no longer necessary. ClampStar® installs in a few minutes, with a hot-stick or gloves. No mechanical grips, come-alongs, jumper cables or cutters are needed. And, ClampStar® meets ANSI C119.4 Class AA, extra heavy duty and restores both electrical and mechanical integrity on weathered conductors. There’s no need to cut power or lines and it easily installs over the existing splice. ClampStar® also increases ampacity allowing for system up-rates and is significantly safer than traditional splice replacements. ClampStar® is available in both rigid and flexible versions to accommodate various cable diameters for both transmission and distribution applications.

*Model Details Below

ClampStar Part Number Conductor Diameter Range Number of Keepers Per Side Average Weight Overall Length
Conductor Range Inches mm Pounds kg Inches cm
CSS-0642L-036*** 2/0 AWG – 266.8 kcmil 0.319 – 0.642 8.1 – 16.3 2 9 4.1 55.6 141.2
CSS-0642-036 2/0 AWG – 266.8 kcmil 0.319 – 0.642 8.1 – 16.3 3 12 5.4 65 165.1
CSS-0883-040 3/0 AWG – 477 kcmil 0.502 – 0.883 12.8 – 22.4 3 20 9.1 69.5 176.5
CSS-1108-048 336.4 kcmil – 795 kcmil 0.684 – 1.108 17.4 – 28.1 4 28 12.7 87 221
CSS-1302-060 715.5 kcmil – 1272 kcmil 1.036 – 1.345 26.3 – 34.2 5 40 18.2 111 282
CSS-1631-066 1272 kcmil – 1780 kcmil 1.345 – 1.631 34.1 – 41.5 20 35 15.9 118 299.8
CSS-1912-060 1351.5 kcmil – 2515 kcmil 1.424 – 1.912 36.0 – 48.6 20 39 17.7 112 284.5
Linestar