Splice Connectors – 57100
These products are used to repair a break in the rod. Having a solid section in the middle of the rod may cause problems with bending at that point and care should be taken when winding rod with a solid connector. The five larger sizes are stainless steel and can be glued or screwed on, the two smaller sizes are brass and must be glued.
| Product # | For Rod Diameter | Weight |
|---|---|---|
| 57100-000 | 1/8″ | 0.01 lb |
| 57100-001 | 3/16″ | 0.01 lb |
| 57100-003 | 1/4″ | 0.09 lb |
| 57100-005 | 5/16″ | 0.09 lb |
| 57100-004 | 3/8″ | 0.14 lb |
| 57100-006 | 7/16″ | 0.14 lb |
| 57100-007 | 1/2″ | 0.14 lb |
