Pole Covers (36.6kV)

Tested to ASTM F712. Meet Class 4 requirements. These pole covers are used to help protect personnel when raising or lowering a pole between energized lines or to cover poles when rubber glove maintenance is performed in relatively confined areas. The covers are made of high-dielectric linear polyethylene material that will not flash flame. This material will have some softening without deformation at approximately 170°F, and it will resist brittleness at temperatures of -50°F. All Chance pole covers are ribbed to reduce cover contact with the pole, thus minimizing creosote contamination. A nylon button on 4- and 6-foot lengths allows the pole covers to be joined together in tandem, where longer lengths require covering. The rope handles permit personnel to spread the covers and snap them around the pole easily; rubber gloves must be worn during this procedure. Prolonged contact with an energized conductor must not be allowed. Button-Nut Kit, T4060214.