Pole Top Cover – 36.6 kV Ø-Ø

PRODUCT #C4060097

Made of high-impact orange ABS plastic, this cover is used to help prevent tie wires from making contact with the pole when tying or untying ridge construction. The cover will fit a pole top of up to 10 inches diameter with either singleor double-ridge pin construction. The maximum bolt length is 16 inches.

The cover rests on top of the pole, covering 10-1/2 inches of the pole top and 4-1/2 inches of the ridge pin. By using the elastic cord furnished with the cover, the cover-up can be butted against the insulator to cover the ridge pin and pole top. Weighs 2-1/2 lb./1.1 kg.