Hastings Fiberglass extension arms
Part Numbers & Accessories Below.
Specifications:
• The Fiberglass Extension Arm is designed for use as a temporary aid in replacing existing conductors and insulators, or as an aid for moving out conductors to obtain working clearance in congested areas
• Easy to install conductor holders are adjustable
• Eye bolts are silicon bronze to prevent seizing
• Load limit 150 lbs. per conductor holder
• Rating 15KV without insulator and 34.5KV with insulator
| 2 1/2” DIAMETER FIBERGLASS EXTENSION ARM FOR DISTRIBUTION CROSS ARMS FITS MAXIMUM CROSS ARM SIZE 4 1/4” W x 6 3/4” H | ||
| Part # | Description | Weight (lbs) |
| 5000 | 5’ ARM WITH ONE CONDUCTOR HOLDER | 11.3 |
| 5001 | 5’ ARM WITH ONE CONDUCTOR HOLDER AND INSULATOR | 11.5 |
| 5006 | 6’ ARM WITH TWO CONDUCTOR HOLDERS | 14.5 |
| 5007 | 6’ ARM WITH TWO CONDUCTOR HOLDERS AND INSULATORS | 15.5 |
| 2 1/2” DIAMETER FIBERGLASS EXTENSION ARM FOR SUB TRANSMISSION ARMS FITS MAXIMUM CROSS ARM SIZE 5 1/4” W x 6” H | ||
| Part # | Description | Weight (lbs) |
| 5036 | 5’ ARM WITH ONE CONDUCTOR HOLDER | 12.0 |
| 5037 | 5’ ARM WITH ONE CONDUCTOR HOLDER AND INSULATOR | 12.3 |
| 5016 | 6’ ARM WITH TWO CONDUCTOR HOLDERS | 14.5 |
| 5016-1 | 6’ ARM WITH TWO CONDUCTOR HOLDERS AND INSULATORS | 15.5 |
| EXTENSION ARM ACCESSORIES FOR ALL 2 1/2” O.D. ARMS | ||
| Part # | Description | Weight (lbs) |
| A10001 | CONDUCTOR HOLDER ONLY | 2.3 |
| A10002 | CONDUCTOR HOLDER AND INSULATOR | 2.5 |
| A30008 | INSULATOR FOR USE WITH A10001 AND A10038 CONDUCTOR HOLDERS | 1.0 |
| A10038 | LARGE CONDUCTOR HOLDER HAS 2 5/8” OPENING | 2.8 |
| A10039 | LARGE CONDUCTOR HOLDER AND INSULATOR | 3.8 |
| P10024 | EYE SCREW REPLACEMENT | – |
