SensorLink Radio Linked Micro-Ohmmeter Kit holds nine sets of readings and transmits to a Remote Receiver and Laptop, up to 2500 µΩ, 1400A, 500KV, Standard 2.5” sensor opening – 6-182

Radio Ohmstik holds nine sets of readings and transmits to a Remote Receiver and Laptop, up to 2500 µΩ, 1400A, 500KV, Standard 2.5” sensor opening

Frequency

60 Hz (57 to 63 Hz) or 50 Hz (47 to 53 Hz) Models available

Range of Operation

Amps: 1 – 1400A
Micro-ohms: 5 – 2500
Voltage Rated: 500 kV

Resolution

Amps 0.9 – 99.9 A: 0.1 A
Amps 100 – 1400 A: 1 A
Micro-ohms 1 – 999: 1
Milli-ohms 1000 – 2500: 1.0

Accuracy

Amps: ± 1% ± 1 A
Micro-ohms Absolute: ± 2% ±2 micro-ohms
Micro-ohms Repeatability: ± 1% ±2 micro-ohms
Note: Accuracy is diminished if the current is less than 15 amps while on 0 – 35kV and when current is less than 50 amps while on 36 – 500 kV

Radio

Frequency: ISM 2.4 GHz
Power: 63 mW, 18 dBm
Power EU and Japan: 10 mW in Europe & Japan
Range: 150′, (46 meters) Line of Sight,
Power EU and Japan: 120’ (36.5 meters) Line of Sight

Detachable Probes

Fused Probe Standard Sensor Model: 7-081 XT
Adjustable Ohmstik Probe, Model: 7-081 ADJ

Mechanical

Standard Sensor Opening: 2.5 in, 6.35 cm
Standard Sensor Weight: 2.3 lbs, 1.05 kg
Receiver Display Weight: 1.4 lbs, 2.62 kg
Ambient Temperature: -4 to +140° F, -20 to +60° C
Battery 9 Volt Alkaline, 1 each per unit
Battery Life 6-8 Hours at 68°F or 20°C, 3-4 Hours at 32°F or 0°C
Display Sensor Unit: Graphics LCD
Display on Receiver Unit: Graphics LCD

Software Requirements for PC Communication

Software Application: Radio Ohmstik Software by SensorLink
System Requirements: Windows XP, VISTA, Windows 7, Windows 8, Windows 10
Hardware Requirements: Minimum of two USB port