fbpx
LINEMAN’S TOOLS & EQUIPMENT

DCD Pulling Harness – 25000 Series

Pulling Harness – 25000 Series

PRODUCT #25000 Series

The purpose of the Pulling Harness is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one Pulling Harness. The Harness legs are manufactured from aircraft quality galvanized wire rope while the Connector end is manufactured from Stainless Steel.

The Double Leg Harness units are staggered in length so the individual connections are not interfering with each other. The *safety factor of 3:1 is based on equal pull both legs.

The Single Harness is supplied with 1 Hex Key and 2 Set Screws. The Double leg Harness is available in Long or Short configurations and each is supplied with 1 Hex Key and 4 Set Screws. Both the Hex Key and the Set Screws are available separately.

Cable sizes that can be pulled with these harnesses is 2/0 to 4/0 AWG.

Specifications:

  • For pulling 2/0 and 4/0 AWG cables
  • Allows single and multiple pulls at one time
  • Staggered lengths
  • Stainless Steel heads
  • Part # Description Wire Diameter Number of Legs 3:1 Safe Working Load Leg Capacity 3:1 Safe Working Load Total Capacity Weight
    25000-010 Single Leg 1/4” 1 2,300 lb 2,300 lb 1 lb
    25000-020 Double Leg – Short 1/4” 2 2,300 lb 4,600 lb 1.7 lb
    25000-021 Double Leg – Long 1/4” 2 2,300 lb 4,600 lb 2 lb
    90000-166 Set Screw 0.1 lb
    00101-375 Hex Key 0.3 lb
    WordPress PopUp Plugin
    Translate »
    LineStar