Buckingham Buckbolt with Anchor

-New OSHA requirement 1910.24(a) (7) states that “Each step bolt installed on or after January 17, 2017, must be capable of supporting at least four times its maximum intended load.” These step bolts meet or exceed this requirement.
-BuckBolts are hot dip galvanized to add a zinc coating that protects against corrosion in the field.
-Designed with a large head at the end of the step bolt to prevent foot slippage, which meets or exceeds OSHA standard 1910.24(a)(2).
-Has a 5” clear width, which exceeds OSHA standard 1910.24(a)(4).
-5/8” diameter thread for installation (SKU 3058).
-3/4” diameter thread for installation (SKU 3075)
-A length of 8.5”
-Rated for 5,000lbs.

Benefits of BuckBolts:

-Safety – safest method to climb a tower, particularly for the first man up.
-Efficiency – On certain structures, angle iron can be very far apart, making it difficult to reach. Often times, one must climb up to connect then climb back down to -disconnect the other leg of the lanyard. This takes twice the amount of climbing which is time-consuming, tiring, difficult to do, and can lead to preventable injuries. With –BuckBolts, the user cuts their work in half.
-OSHA Compliance – Compliant with the new OSHA requirement 1910.24(a) (7) that states each step bolt installed on or after 1/17/2017 must be capable of supporting at least -four times its maximum intended load. Anchorage points on BuckBolts and Flanges are rated to 5,000lbs.