Hastings 35kv Line Guards and Insulator Hoods
Hastings 35 K Line Guards and Insulator Hoods are designed for easy installation and removal. They are made from bright yellow ABS plastic which gives high visibility
Specifications:
Ratings — The maximum rating 36.6 KV Ø to Ø is obtained when all phases are properly covered. The maximum rating is 21.1 KV KV to ground when only one phase is covered
Installation — Guards and Insulator Hoods are provided standard with eye for installation with shotgun hot sticks. Guards with 4 ft. fiberglass installing sticks are available as optional equipment. Pulling downward and rotating installs guard
Interlocking — Male and female ends allows as many guards as needed to be installed on conductors. The 35 KV line guards are also ideal for use on lower voltages and will couple together over 15 KV pin type insulators, single or double crossarm
Tested — Line Guards and Hoods are tested per ASTM
Wire Range — Guards are designed to accept all sizes up to and incuding 1,272 MCM 45/7 ACSR
Storage — Two guards can be nested together, saving vehicle storage space
| Part # | Description | Weight |
| 6010 | 35 KV line guard 4′ 6″ long with shotgun eye | 8 lbs. |
| 6011 | 35 KV line guard 4′ 6″ long with 4 ft. insulating stick | 8.5 lbs. |
| 9144* | 35 KV single pin insulator hood, 22″ long | 5 lbs. |
| 9770* | 35 KV double pin insulator hood. Adjustable in three lengts, 27″, 32″ and 37″ | 7.5 lbs. |
| * Voltage rating 35 KV if used with 6010 or 6011 guards 46 KV if used with 6012 or 6013 guards 69 KV if used with 12000 or 12001 guards |
||
