Dillon Edjunior Digital Dynamometer
The Dillon EDjunior dynamometer gets straight to the point — apply a load, take a reading. Its Spartan design is a direct response to industries that have wanted an extremely well-built instrument that could be relied upon for simple, yet critical measurments of weight and force.
The EDjunior dynamometer draws its strength from the exhaustive engineering that went into the design of the new Dillon EDxtreme dynamometer. Both share the same base of research and testing that was conducted to match material characteristics and load cell technology. The choices made in the development of the EDjunior have yielded an exceptionally rugged instrument capable of consistently delivering accurate, repeatable measurements.
Enclosure: Designed to NEMA4X/IP55. Suitable for continuous outdoor use.
Accuracy: 0.2% of capacity
Repeatability: 0.2% of capacity
Proof Load: 150% of capacity
Ultimate Overload: See table on reverse
Safe Overload: 200%
Display: 128 x 64 dot-graphic LCD display shows all digits 1.0” (26 mm) high plus annunciators and softkeys
Display Update Rate: 2 times per second
Peak Hold Sampling Rate: 10 times per second typical
Calibration: Traceable to the National Institute of Standards and Technology. Calibration card included.
Battery Life: 425 hours typical use with two C-cell alkaline batteries
Backlight: Configurable. Using backlight will consume more battery power, reducing battery life.
Operating Temperature: -4° F to 158° F (-20° to 70° C)
Included with Instrument: Carry case, batteries, manual and calibration card
Overload: Recorded at 120% with date and time stamp
| Capacity x Resolution | Body Construction and Overload Design | |||
| EDjr–1T (EDjr-2.5K ) | 2,500 lbf x 2 | 1,000 kgf x 1 | 10,000 N x 10 | Aircraft quality 2024 Aluminum 700% Ultimate overload protection |
| EDjr–2T (EDjr-5K) | 5,000 lbf x 5 | 2,000 kgf x 2 | 20,000 N x 20 | |
| EDjr–5T (EDjr-10K) | 10,000 lbf x 10 | 5,000 kgf x 5 | 50,000 N x 50 | |
| EDjr–10T (EDjr-25K) | 25,000 lbf x 20 | 10,000 kgf x 10 | 100,000 N x 100 | E4340 Alloy Steel 500% Ultimate overload protection |
| Dimensions (Dimensions shown are nominal and subject to tolerances) | ||||||||||
| Model | A | B | C | D | E | F | G | H | I | J |
| EDjr–1T (in/mm) | 8.4/213 | 5.0/127 | 6.9/174 | 0.75/19 | 0.50/13 | 11.6/296 | 10.8/274 | 1.2/30 | 2.03/52 | 1.16/29 |
| EDjr–2T (in/mm) | 10.6/269 | 5.0/127 | 7.8/198 | 1.06/27 | 0.75/198 | 14.8/375 | 13.4/340 | 1.41/35 | 2.94/75 | 1.69/43 |
| EDjr–5T (in/mm) | 11.4/289 | 5.3/135 | 8.1/206 | 1.38/35 | 1.0/25 | 17.8/451 | 15.8/402 | 2.22/56 | 4.03/102 | 2.28/58 |
| EDjr–10T (in/mm) | 11.5/291 | 5.3/133 | 7.9/201 | 1.97/50 | 1.38/35 | 21.6/548 | 18.8/478 | 3.67/93 | 4.53/115 | 3.25/83 |
| Weights | |||
| Model | Unit Weight | Weight With Shackles | Approx. Shipping Weight |
| EDjr–1T lb | 2.9 | 3.9 | 14 |
| EDjr–1T kg | 1.3 | 1.8 | 6 |
| EDjr–2T lb | 4.5 | 7.8 | 17 |
| EDjr–2T kg | 2.0 | 3.9 | 8 |
| EDjr–5T lb | 6.4 | 14.3 | 23 |
| EDjr–5T kg | 2.9 | 6.5 | 10 |
| EDjr–10T lb | 17.0 | 41.0 | 50 |
| EDjr–10T kg | 8.2 | 19 | 23 |
