Two-Pole Strain Carrier Accessories
Two-pole yokes can be ordered separately to make up any of the two pole strain carriers shown on Page 2254. The yokes are fabricated of high strength (3/4″ and 1″ thick) aluminum plate.
The yokes have 26″ width between the center of the adjustable strain poles used with them. Maximum load ratings are 15,000 pounds per insulator string.
Deadend Compression Yoke Assembly
Used with Two-Pole Strain Carriers, these units grip compression sleeves over the compressed area, requiring no shoulder or adapter to pull against. Castings are heat treated aluminum. When used with 2″ adjustable strain poles, this assembly is rated at 11,000 pounds maximum load.
Designed specifically for use on extension links. A swing up gate exposes the shoe area of the assembly to the load and must be closed before taking up tension.
For replacement or conversion, these trunnions are bronzealloy and ball-thrust bearing construction for use on adjustable strain poles. They are designed to equal the capacity of all Chance yokes and provide maximum efficiency for the lineman. Require M19483 Ratchet.
Gauge for Trunnions E4012066 and E4012068 above with 3/4″ Acme threads.
Deadend Sockets (Max. Load Rating: 15,000 lb.)
The Deadend Socket is furnished with the Two-Pole Strain Carrier. Use following catalog number for ordering replacement.
|C4011720||Conductor End Yoke Assembly||25 lb./11.3 kg.|
|C4011721||Conductor End Yoke Assembly||20 lb./9.0 kg.|
|C4010095||Compression Yoke Assembly Complete with a Hot Line Extension Link for 3/4″and 1″ dia. shank||44 lb./19.8 kg.|
|E4012066P||One Large Trunnion, replaces 70356||3 1/2 lb. / 1.6 kg.|
|E4012068P||One Small Trunnion, replaces E4010486||2 lb./0.9 kg.|
|T4012265||Trunnion Gauge for 3/4″ Acme threads||1/2 lb. / 0.25 kg.|
|C4011894||For Extension Links with 7/8″ Shank and 1-1/2″ Collar.||–|