DCD Cable Applicators

The extreme liquid consistency of TUBE-LUBE 326 (SG = 1.04) minimizes viscous friction which allows for easy application through the use of a spray applicator. We offer a few different spray applicators as such.

A manually pressurized Manual Applicator Kit.

A manually pressurized spray tank with a pressure gauge allows the user to monitor the amount of lube being sprayed onto the cable via the included hand-held wand, or any of DCD’s products fitted with a quick connect spray nozzle. Different pressures allow different volumes. A manual shut-off valve leads to a quick disconnect coupling.

A 20′ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20′ away.

A battery operated back pack Power-Spray Applicator Kit

This unit holds a little over 4 gallons and can be carried on the operator’s back. A 4-speed pump controls the volume of lube applied. The pump is operated by a re-chargeable battery with about 8 hours usage time. The unit comes complete with re-charger and a spare battery. The outlet hose also leads to a quick disconnect coupling. A 20′ Long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the Applicator and operator to remain outside the manhole, while the connection to the duct is up to 20′ away. Semi-clear tank allows visibility of the lube level.