Polywater® F Fiber Optic Cable Pulling Lubricant

Polywater® F Fiber Optic Cable Pulling Lubricant

Lubricant for
Fiber Optic Cable Pulling

Polywater® F Lubricant is a high-performance, pourable liquid recommended for pulling underground fiber optic cable. It is also suitable for pulling coaxial and copper-pair cable.

Polywater® F Lubricant wets and clings to cable jacket and evenly coats the jacket surface. It continues to lubricate by leaving film after its water base has evaporated. It is compatible with a broad range of cable jackets, including polyethylene (PE) types.

Polywater® F Lubricant is a thick liquid, and is applied by pouring or pumping the lubricant into the duct system.

Polywater® F comes in two versions – a Regular version and a Winter version for cold weather use in temperatures as low as -20°F/-30°C.

The packages (with the exception of the drum) are all designed to allow the lubricant to be poured into upturned innerduct or a feeder tube.


  • Superior Friction Reduction – For lower tension and/or longer pulls.
  • Wets Out and Coats PE Jackets – Lubricates at all points of cable rub on long pulls.
  • Pourable – Can be poured into innerducts and feeder tubes.
  • Compatible with Cable Jackets – Avoid weakened or cracked cable jackets.
  • Slow Drying – Leaves a lubricious residue for lasting lubrication.
  • Pumpable – Pump available for easy, mess-free application.
  • Proven – Used over 20 years in installation of over 140,000 kilometers of fiber cable.
  • Available in Cold Weather Formula – Polywater® WF can be used in cold weather pulling.
  • Catalog # Catalog # Winter Grade Package Description Units/Case
    F-35 WF-35 1-quart/0.95-liter squeeze bottle 12
    F-128 WF-128 1-gallon/3.8-liter jug 4
    F-320 WF-320 2.5-gallon/9.6-liter pail 2
    F-640 WF-640 1
    F-DRUM WF-DRUM 55-gallon/208-liter drum 2
    WordPress PopUp Plugin
    Translate »