Polywater® SPY™ Sprayable Cable Pulling Lubricant

Sprayable Liquid Lubricant For Cable Pulling or Pushing

Polywater® SPY™ Lubricant is a concentrated liquid that can be sprayed into the duct or wiped on the cable in a thin film. Industrial sprayers are available for automatic spraying application. Polywater® SPY™ is based on unique lubricant chemistry and technology. Much like a paint, the lubricant thins as it is sprayed or wiped. Once on the cable or conduit surface, it thickens to stay coated.

Polywater® SPY™ Sprayable Cable Pulling Lubricant reduces friction effectively and compares favorably with the other high-quality Polywater® Lubricants.

Polywater® SPY™ Sprayable Cable Pulling Lubricant has been successfully tested for a variety of uses:

Polywater® SPY™ Sprayable Cable Pulling Lubricant has been successfully used for:
— Lubricating fiberglass rods for easier and longer insertions during fishing.
— Spraying holes in wood studs to reduce tension in hand-pulled Romex wire.
— Eliminating need to fish by allowing shorter runs of wire to be pushed.
— Lowering tension on traditional building wire pulling into EMT or PVC conduits.
— Pressurized spraying for no-mess underground cable installation.

Polywater® SPY™ comes in two grades – a regular grade and a winter grade for cold weather use in temperatures as low as -20°F/-30°C.

The SPY-35LR is a refillable, spray trigger bottle practical for shorter wire runs.

The SPY-D20 contains lubricant-saturated towels that coat the wires as they are pulled.

Specifications: