Pulling Harness – 25000 Series
PRODUCT #25000 Series
The purpose of the Pulling Harness is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one Pulling Harness. The Harness legs are manufactured from aircraft quality galvanized wire rope while the Connector end is manufactured from Stainless Steel.
The Double Leg Harness units are staggered in length so the individual connections are not interfering with each other. The *safety factor of 3:1 is based on equal pull both legs.
The Single Harness is supplied with 1 Hex Key and 2 Set Screws. The Double leg Harness is available in Long or Short configurations and each is supplied with 1 Hex Key and 4 Set Screws. Both the Hex Key and the Set Screws are available separately.
Cable sizes that can be pulled with these harnesses is 2/0 to 4/0 AWG.
Specifications:
| Part # | Description | Wire Diameter | Number of Legs | 3:1 Safe Working Load Leg Capacity | 3:1 Safe Working Load Total Capacity | Weight |
| 25000-010 | Single Leg | 1/4” | 1 | 2,300 lb | 2,300 lb | 1 lb |
| 25000-020 | Double Leg – Short | 1/4” | 2 | 2,300 lb | 4,600 lb | 1.7 lb |
| 25000-021 | Double Leg – Long | 1/4” | 2 | 2,300 lb | 4,600 lb | 2 lb |
| 90000-166 | Set Screw | – | – | – | – | 0.1 lb |
| 00101-375 | Hex Key | – | – | – | – | 0.3 lb |
