iTOOLco Cannon 12K™ Wire Puller

iTOOLco Cannon 12K™ Wire Puller

The only 6-speed puller with reverse gear, dual capstans and 12,000 lb. of pulling capacity.

The fully self-contained, compact design of the Cannon 12K™ wire puller features the only speed reversible motor that is sure to get even the heaviest pulls done in record time. Designed specifically for easy set up to meet job site demands, all parts store right on the puller. No gang box of parts needed. When extra extensions are used, the wire puller is capable of pulling out 13′ of wire from the conduit opening. Gone are the days of pulling at only 6 feet per minute. iTOOLco’s Cannon 12K™ pulls at speeds up to 36 ‘ per minute. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 12K™ is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck.


  • 12,000 lb. pulling capacity
  • Customized motor with reverse gear
  • 6 Speed dual capstan
  • 5′, 10′ & 15′ (per min.) on low speed, 12′, 24′ & 36′ on high speed
  • Self-contained – ready to pull
  • Quickly change from side pull to overhead, underground or truck hitch
  • No gang box of parts
  • Adjustable counter-balance for easy setup and a 15 lb. working weight
  • Extra 33” & 15” extensions allow for longer reach
  • Pulls out 13 feet of extra wire from conduit opening to capstan
  • Rear swiveling casters for job site transportation and precise conduit positioning
  • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
  • Extra receiver hitch adapter
  • No anchoring required
  • Easily maneuvers into tight spaces
  • Specifications:

    Product Number: C12K
    68”L x 30”W x 57”H (Collapsed)
    188”L x 30”W x 57”H (Extended)
    404 lb.
    Pulling rope minimum average breaking strength 15,000 lb.
    Recommended pulling rope size 5/8″ or larger


  • Cannon 12K™ wire puller (with a total weight of 308 lb.)
  • Universal adapter – for loads under 5,000 lb.
  • 5 Conduit adapters sizes 2″ through 4″ (5″ & 6″ available)
  • 33″ extension
  • 15″ extension
  • Extra receiver hitch adapter
  • Powered by a 20 amp, 6 speed coring motor with built-in slip clutch (6-year factory warranty on motor)
  • Foot switch (UL listed)
  • WordPress PopUp Plugin
    Translate »