Puller – P-1260

Puller – P-1260


The Sherman + Reilly P-1260 is an intermediate size puller for installing conductor in heavy-distribution and sub-transmission construction. It features 12,000 lbs of smooth pulling capacity at top of drum and 360,000 inch lbs of torque, providing high capacity for long, heavy, and safe pulls in a tandem axle configuration that is easy to tow and maneuver. The operator’s position is well-protected and equipped with a full set of controls and seat that faces the drum, providing the operator an unobstructed, near-in-line view of the pull.

The drum axle is equipped with a 20 in. aluminum-bronze disc- caliper payout brake, providing safe, well-controlled pulls. 10,000 ft capacity with 7/8″ rope or 14,000 ft. capacity with 3/4″ rope enables using the P-1260 for a broad range of pulls, stretching budgets and adding operational flexibility. It is equipped with a hydraulically controlled levelwind, facilitating even distribution of lines and reducing risk of damage and interruptions during a pull.

The trailer features a hydraulic front jack, and two rear hydraulic leveling jacks which allow the operator to set up and be ready
to operate quickly on most surfaces or terrain with stability. Its continuous weld strength and steel construction provides a solid and durable piece of equipment, able to withstand rough field use


  • 10,000 ft. capacity for 7/8 in. rope.
  • 14,000 ft. capacity for 3/4 in. rope.
  • Protected, off-ground operator position.
  • Hydraulic levelwind.
Pulling Capacity, max.: 12,000 lb., top of drum
Line Speed, max.: 4 mph
Torque, max.: 360,000 in.-lb.
Pulling Drum Size: 60 in. OD x 47 in. wide
Drum Capacity: 10,000 ft. of 7/8 in. rope; 14,000 ft. of 3/4 in. rope
Drive System: Hydrostatic Transmission, chain and sprocket
Engine: Diesel, 173 HP, Water Cooled
Hydraulic Fluid: ISO Grade 32
Emergency/Parking Brake: Ratchet-and-Pawl (active in pulling mode only)
Payout Brake: 20 in. Caliper/Disc Aluminum-Bronze
Levelwind: Hydraulic, Telescoping
Operator’s Safety Cage & Seat: Standard
Frame Construction: Steel tubing, continuous-weld
Length, overall, nom.: 21 ft., 8 in.
Width, overall, nom.: 8 ft., 6 in.
Height, overall, nom.: 8 ft., 10 in.
Weight, nom.: 13,000 lb. (without drum)
GVWR: 23,500 lb.
Axle Configuration: Tandem
Brakes, trailer: Electric with safety break away switch
Towing Attachment: 3 in. adjustable Pintle Eye
Lights, navigation: US DOT, LED, 12 VDC
Front/Nose Jack: Hydraulic (1)
Rear Jacks: Hydraulic (2)
Electrical System: 12 VDC
Battery: 12 V, group 24
Suspension: Leaf spring
Wheel Chocks & Holders: Standard
Fire Extinguisher: ABC
Paint: S+R white
Translate »