“V-Groove” Puller-Tensioner – TPVG-1424-T
Capable of tensioning up to 4,000 lbs. at 4 mph, the Sherman + Reilly Model TP-1424-T “V” Groove Tensioner provides the ultimate in smooth tension control of single conductor through its purely controlled hydraulic system. Equipped with a 42” diameter v-groove bullwheel, cast with polyurethane and precision CNC machined for proper radius and depth. The “V” Groove tensioner is also equipped with an automatic emergency brake in case of loss of hydraulic pressure or power.
Reverse pull back drive allows for easy rewinding of unused conductors or pulling out old conductor at 2.5 mph when re-conductoring. Powered with a 25 h.p. liquid cooled diesel engine with a 40 gallon hydraulic reservoir. Operator’s protective seat and screen are standard.
| Maximum Tensioning Capacity: | 4,000 lbs. |
| Maximum Pulling Capacity: | 4,000 lbs. |
| Maximum Speed Tensioning Mode: | 4 mph |
| Reverse Drive (Pullback): | 3,000 lbs. @ 2 mph |
| Bullwheel Size: | 42″ dia. |
| Groove Diameter (Conductor): | 1.5 in. dia. |
| Bottom of Groove: | 36 in. dia. |
| Groove Lining Material: | Cast polyurethane 92 durometer A scale |
| Bullwheel V-Groove Profile: | Precision machined CNC |
| Power Train: | Diesel, 25 HP, water-cooled |
| Tensioning (Hydraulic Motor): | Planetary gearbox (closed loop system) |
| Final Drive: | Chain and sprocket |
| Fail-Safe Brake: | Hydraulic relieved / spring applied |
| Directional Controls: | Variable speed, pressure and pre-set mode |
| Reel Capacity: | 1 reel carrier |
| Maximum Reel Width: | 54″ |
| Maximum Reel Diameter: | 84″ |
| Maximum Reel Weight: | 8,000 lbs. |
| Reel Shaft: | 2- 5/8″ |
| Reel Brake: | 16 in. aluminum/bronze caliper disc |
| Tailing Tension Brake Control: | Hydraulic; adjustable from operator console |
| Frame Construction: | Steel tubing, continuous-weld |
