fbpx
LINEMAN’S TOOLS & EQUIPMENT

Hioki Phase Detector – PD3129

Phase Detector – PD3129

Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model PD3129-10 is a non-contact phase rotation meter that detects the phase of electrical current flow within insulated wires without using metallic contact voltage clips. The green arrow indicates normal phase, which can be useful for visual reports that document the proper completion of electrical work.

Key Features:

• Simply clip clamps onto wire insulation
• Green LED arrow clearly shows phase direction, perfect for visual reports
• CAT III 1000V
• Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance
• Intermittent beeps signal positive phase; continuous tone signals reverse phase
• Magnetic base allows the instrument to be secured on a distribution panel

Easy-to-understand detection of normal phase with lit arrow

The arrow in the center of the instrument turns green to indicate normal phase. In this way, normal phase can be recognized at a glance. In addition, the arrow shows up clearly in photographs, making the PD3129 ideal for documenting proper installation in end-of-project reports.

Safe, no-metal-contact design

The PD3129 uses no-metal-contact clips that need only be clipped to the outside of each insulated wire, allowing phase to be detected safely.

Magnetic back for maximum work efficiency

Four magnets on the back of the instrument allow it to be secured in place on distribution panels. By leaving your hands free for other tasks, this feature dramatically boosts work efficiency.

Model PD3129 PD3129-10
Functions Phase detection (positive/negative)
Voltage Range 70 to 600 VAC (sine wave, continuous) 70 to 1000 VAC (sine wave, continuous)
Frequency Range 45 to 66 Hz
Object to be connected 2.4mm (0.09 in) to 17mm (0.67 in) of insulated wiring 7mm (0.28 in) to 40mm (1.57 in) of insulated wiring
Phase-detection indication Positive: 4 LEDs lit in clockwise order and the buzzer sounds intermittently, green arrow lights up

Negative: 4 LEDs lit in counterclockwise order and the buzzer sounds continuously

Functions Live line check, Battery check, Auto power off
Power Supply R6P (AA) maganese battery x2, Continuous operating time: 70 hours
Dimensions 70W x 75H x 30D mm (2.76″W x 2.95″H x 1.18″D
Mass 200g (7.1 oz) 240g (8.5 oz)
WordPress PopUp Plugin
Translate »
LineStar