REC-P1-AT ROBO*PUMP

The Huskie REC-P1 is a 28.8 volt, battery operated hydraulic pump that runs on two 14.4 Volt Huskie BP-80 series batteries. The REC-P1 is supplied with a push button remote control that allows the operator to advance, hold, and retract when needed. The user is never committed to a full cycle and can always back off at any time during the advance– even when the pump is under pressure. High pressure, non-conductive hose can be attached to a 360° moveable swivel port on the pump. This swivel port allows the user to position the hose to fit in confined aerial buckets and manholes.

Both batteries must be inserted in the pump to operate. It is recommended to operate the pump with a 10 foot hose, up to a maximum of 20 feet. A longer hose will cause cycle times to increase. We recommend you specify the Huskie SC-Series flush face dripless couplers, as not to deplete the oil in the reservoir when changing heads.

Features:

-Powerful 28.8 Volt
-Operate Up to Single Acting 60 Ton Press
-Adjustable 10,000 psi
-Eliminates the Need for AC Power
-Compact and Portable

Specifications:

Output 10,000 psi
Weight 23 lbs. with 2 Batteries
Size 16”L x 6”H x 10”D