Huskie – 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening – REC-660YC
PRODUCT #REC-660YC
The REC-660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter. The extra wide jaws make cutting the larger diameter underground cables easier. The hydraulic system is designed the same as the REC-658U featuring a rapid advance ram to reduce cycle time. Because of the larger cutting surface of the blades, the maximum size copper cable that can be cut is 500 MCM. Larger cables will simply cause the cutter to bypass, which is a built-in overload safety device to prevent damage to the tool. The large jaws can be placed over cables that lie flat on the ground and the cables will be scooped up as the cutting jaws are closed. All cuts are clean so that there is minimal cable distortion for cable sleeving purposes.
NOTE: DO NOT CUT STEEL.
Features:
- Open Scissor Jaw for Easy Cable Insertion
- Tested Up to 75kV
- One Hand Operation
- Rotational Head
- Rapid AdvancE
- Ergonomically Balanced
- Ergonomic Pistol Grip Handle
- Weather Resistant Housing
- Overload Bypass Protection
- Specifically Designed to Cut Large Jacketed Underground Cable
- For Copper and Aluminum Only
- 5 Year Warranty on Tool, Battery & Charger
*Will not cut ALL 500 MCM copper cable-consult factory.
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
For questions regarding a specific material, please contact a Linestar Tools Representative.
