GMP – G Cable Lasher

GMP – G Cable Lasher

The largest of the GMP Lashers, this unit is designed to lash large single or combination of aerial cable up to 5 in. diameter to a supporting strand. Can be used for new installs or with existing cables in place.

This big tough lasher has a pulling mechanism that pivots about the axis of the rear driving roller, so it always applies the right amount of hold down force. For lashing large diameter cable, it’s your best choice.


• Lashes any cable from about 2-1/2 in. to 5 in. (64-127 mm) diameter, on strand from 11/32 in. to 3/4 in. (9-19 mm) diameters with one or two left lay spiral wrappings of .065 in. diameter stainless steel wire

• Nominal spacing between wraps is 16-1/2 in. (42 cm).

• Each lasher includes a 6 ft. bridle rope assembly with snap hooks, an information, and operations manual and a heavy duty storage chest

Part Number Description Wire Dia. Weight
10500 G Cable Lasher Standard .065 71 lbs. (32.3 kgs)
10502 G Cable Lasher Modified for 1200 ft. of .045 in. wire .045 71 lbs. (32.3 kgs)
03165 Bridle Rope Assembly only 3 lbs. (1.4 kg)
10501 Chest only 36 lbs. (16.4 kgs)
70190 Towing Lanyard 35 ft. (optional)(250 lbs. WLL) 6 lbs. (2.7 kgs)
WordPress PopUp Plugin
Translate »