fbpx
LINEMAN’S TOOLS & EQUIPMENT

DCD Power Blower – 58400 Series

DCD Power Blower – 58400 Series

DCD now offers a new portable Power Line Blower. While there are several other similar products on the market, the DCD unit offers a higher pressure output along with an excellent list of special features including:

Specifications:

  • A Stainless Steel housing fitted with a rugged powder coated steel lid and carrying handle that doubles as a coiler for storing the power cord.
  • Certification for outdoor use (not in rain).
  • Two 1.8 HP heavy duty electric motors fitted with non-corrosive components and sealed bearings, each individually fused and delivering up to 225 cfm and 4 psi. The high psi rating allows longer blows, especially when under load (See below for full explanation).
  • An extra heavy duty 25′ long 2″ hose made of crush resistant polyethylene which will stand up in temperatures from ?40 to +140 deg F.
    The blowers operate at 110V and require 30 amp source. 220V units also available (not CSA approved).Although other manufacturers have a higher cfm rating, that will only increase the speed of the dart – instead of taking 8 seconds to travel 500 feet, the DCD unit may take a couple of seconds more. The higher pressure rating is key because this will allow a dart carrying pull tape or twine to travel further with higher loads, even though it might take a few seconds longer. See below for a more detailed explanation.DCD also offers a full line of blowing accessories detailed on the following pages. The standard Foam Bird types are available as well as the twin coned Line Darts. A all polyurethane Ultralight Bird not offered by other manufacturers is available as well as a the standard Inflatable type for use with product already in the duct. The Seal-offs units are sized to fit ducting up to 6\” and the handle is fitted with a special selector for different twine or pulling tape sizes.
    Part # Description Weight
    58400-000 Power Blower 110V 16.7 lb
    58400-110 Power Blower with 15’ Hose (2” dia.) and Seal Offs for 1/2” to 6” duct 26.8 lb
    58400-200 Power Blower (58400-000) with Voltage Converter (58400-201) 74.7 lb
    58400-201 Voltage Converter to convert 220V power to 110V 58 lb
    58400-220 Power Blower (58400-000) with Voltage Converter (58400-201), 15’ Hose (2” dia.), and Seal Offs for 1/2” to 6” Duct 94.8
    58410-025 25’ Optional Hose (2” dia.) 10.5
    WordPress PopUp Plugin
    Translate »
    LineStar