Duct Couplers
PRODUCT # see chart below
DC-10 Duct Couplers are two-piece split design held together by 4 stainless steel bolts. The DC-10 connects two ends of inner duct while sealing the joint against air leakage during a cable-air installation. The coupler is reusable or can be installed as a permanent connection. The coupler can easily be installed by one person with the DH-10 Duct Holder Tool and available in a variety of sizes.
Specifications:
a 20 psi drop in pressure in two minutes starting from a sealed pressure 100-130 psi.
DC-10-1.30…………………………… 1” I.D. ribbed
DC-10-1.40…………………………… 1 1/8” I.D. ribbed
DC-10-1.50…………………………… 1 ¼” I.D. ribbed
DC-10-1.66…………………………… SDR11, 1 ¼” I.D. S.Wall
DC-10-1.90…………………………… SDR11, 1 ½” I.D. S.Wall
DC-10-2.35…………………………… SDR11, 2” I.D. S.Wall
DC-10-2.35/3.53 ……………………..Transitional
DC-10-3.53…………………………… SDR11, 3” I.D. S.Wall
* Many other sizes are also available upon request.
Push-2-Connect Couplers:
Maximum Burst Pressure: >300 psi
Maximum Sustained Pressure (15 min.): >300 psi
Maximum Air Pressure Pass Through: 450 psi
Maximum Pull: >1500 lb.
Product Description_______To Fit Duct Outer Diameter___S&R Part No.
Push2Connect-1.66…………………………….1.66”………………………….554019
Push2Connect-1.58…………………………….1.58”………………………….553259
Push2Connect-1.58/1.66……………………1.58”/1.66”……………………551756
Push2Connect-2.375……………………………2.375”……………………….509884
