Certified Lifting Tongs
Ordering Options Below.
Upset forged Round Alloy Steel for optimum tensile strength and durability. Proof loaded to two (2) times the Working Load Limit (WLL) then affixed with a permanent metal identification tag. Only certified and proof tested alloy products should be used for overhead lifting
Specifications:
- Written certification supplied at time of shipment
- Lifting Tongs are supported by either Screw Pin Shackle or a Nut & Bolt Safety Shackle with a Ring
- Tong shape has been designed to provide a sure grip on poles and logs
- Painted bright orange for job site identification
- 1” x 20”
| Tong Size | 3/4″x16″ | 1″x20″ | 1″x25″ | 1-1/4″x32″ | 1-1/2″x36″ | |
| Item # | 150167 | 150164 | 150163 | 150166 | 150165 | |
| Lifting Area (height) See Figure A | 75 deg | 7″ | 9″ | 10″ | 14″ | 16″ |
| 135 deg | 5″ | 6-1/2″ | 7″ | 10″ | 11″ | |
| 180 deg | 3-1/2″ | 4″ | 4″ | 6″ | 7″ | |
| Length of Jaw Opening See Figure B | 75 deg | 3-1/2″ | 6″ | 7-1/2″ | 8-1/2″ | 12″ |
| 135 deg | 12″ | 17″ | 20″ | 27″ | 32″ | |
| 180 deg | 16″ | 20″ | 25″ | 32″ | 36″ | |
| Degrees of Opening WORKING LOAD LIMIT IN LBS | 75 deg | 1500 | 2500 | 2500 | 3000 | 5000 |
| 135 deg | 1000 | 2000 | 2000 | 2500 | 4000 | |
| 180 deg | 750 | 1500 | 1500 | 2000 | 3000 | |
| Closed Height From Base To Inside Top of Ring See Figure C | 18-3/4″ | 23-1/4″ | 25-1/4″ | 13″ | 37-3/4″ | |
| Size of Shackle Used on Tongs | 3/8″ screw pin | 1/2″ bolt & nut | 1/2″ boll & nut | 5/8″ bolt & nut | 3/4″ bolt & nut | |
| Size of Ring Used on Tongs | 5/8″ | 3/4″ | 3/4″ | 7/8″ | 1″ |
